- Homepage
- Brand
- Maximum Torque
- Power Source
- Sub-type
- Type
- 1 / 2 Impact Wrench (4)
- Combo Kit (7)
- Cordless Drill (13)
- Cordless Screwdriver (6)
- Cordless Wrench (9)
- Drill (19)
- Drill / Driver (108)
- Drill Set (47)
- Impact Drill (35)
- Impact Driver (90)
- Impact Wrench (2022)
- Impact Wrench Kit (15)
- Impact Wrenches (128)
- Keyless Chuck (20)
- Mini Drill / Driver (25)
- Power Drills (35)
- Power Tools (6)
- Ratchet (18)
- Ratchet Wrench (5)
- Wrench (17)
- Other (717)
- Voltage
Makita DTW700Z 18V Cordless Impact Wrench
MAKITA DTW300Z 18V LXT CORDLESS BRUSHLESS 1/2 IMPACT WRENCH BODY ONLY. The Makita DTW300 is a cordless 1/2 inch impact wrench powered by a single 18V LXT Li-Ion battery. This DTW300 provides improved fastening control - ideal for automotive, installation, and fabrication trades. The DTW300 impact wrench combines extended run time and speed control for unmatched fastening performance.
It is powered by a Makita-built brushless motor for longer run time. The brushless motor delivers 330Nm of Max Torque and 580Nm of Nut-Busting Torque. Precise fastening control is achieved through the 4-speed power selection switch, which accounts for a wide range of applications.
Three forward and three reverse rotation auto-stop modes offer increased efficiency when fastener is adequately loosened. The full-speed mode function reduces the trigger pull to reach full speed. The DTW300Z features Makita's Extreme Protection Technology (XPTT), a protective seal inside the tool. It is designed to improve a tool's operation in harsh conditions by channelling water and dust from key internal components.
Efficient BLT Brushless Motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge. The electronically-controlled BLT Brushless Motor efficiently uses energy to match torque and RPM to the changing demands of the application.3 forward and 3 reverse Auto-Stop modes for increased efficiency. 4 Stage power selection for optimum rpm and fastening torque. 330 Nm of Max Torque and 580 Nm of Nut-Busting Torque.
XPT technology that protects against dust & moisture. LED Job light with pre-glow and after-glow functions. Compact and ergonomic design at only 144 mm long.Rubberised soft grip provides increased comfort on the job. Equipped with Star Protection Computer ControlsT to protect against overloading, over-discharging and over-heating. Nut Busting Torque: 580 Nm. Blows per Minute (Hi): 0 - 3400 ipm.
Blows per Minute (Med): 0 - 2600 ipm. Blows per Minute (Lo): 0 - 1800 ipm. Standard Bolt: M10 - M20. High Tensile Bolt: M10 - M16. No Load Speed (Max): 0 - 3200 rpm.
No Load Speed (Hard): 0 - 2600 rpm. No Load Speed (Med): 0 - 1800 rpm. No Load Speed (Soft): 0 - 1000 rpm. Net Weight: 1.5 - 1.8 kg. Noise Sound Pressure: 97 dB(A). Noise Sound Power: 108 dB(A). Noise K Factor: 3 dB(A).Vibration Fastening Bolt: 12.5 m/sec². Vibration K Factor: 1.5 m/sec².