Makita DTW1002Z 18V LXT Brushless 1/2In Impact Wrench Bare Unit

Makita DTW1002Z 18V LXT Brushless 1/2In Impact Wrench Bare Unit. Models DTW1001/ DTW1002/ are high torque cordless impact wrenches powered by 18V Li-ion battery. Nut busting torque: this machine can loosen a bolt tightened to a torque of 1,600 Nm.

Note that the 1,600 Nm does not mean the actual tightening torque of DTW1002 in reverse rotation mode. Variable speed control by trigger. Electronic 3-stage impact power selection (Hard/Medium/Soft).

These batteries are reasonably priced but are very damaging to the environment. They also need to be completely discharged and cool to be able to accept a full charge. Ni-MH (Nickel Metal Hydride) battery.

With this battery technology it was possible to increased the amperage to 3.0Ah, they are also a better option environmentally than Ni-Cad. They can be fully charged whether they are warm or partially discharged. Lighter weight, quicker charging and with more run time than an equal voltage Ni-Cad or Ni-MH battery.

These batteries have a chip that communicates with the charger for optimum charging. Lithium-ion batteries also offer much improved charge retention over long periods of storage.

Li-ion batteries do not have to be fully discharged before charging in fact they can be charged at any time with no ill effect. Body only Body only models are supplied without batteries, charger and case. Due to the one battery fits all aspect of the Makita cordless products our batteries are interchangeable across machines in the same range. This makes putting together the perfect kit more affordable and creates less impact on the environment. Blows per Minute (Hi) - ipm. 0 - 2,200 ipm. Blows per Minute (Med) - ipm. 0 - 2,000 ipm. Blows per Minute (Lo) - ipm.

0 - 1,800 ipm. Sound level Machines have the habit of producing noise.

Noise above 80 dB (A) is harmful. &#######xA0; The maximum time of exposure depends on the sound pressure level. 80dB (A): 8 hours 83dB (A): 4 hours 86dB (A): 2 hours 89dB (A): 1 hours 92dB (A): &#######xBD; hour 95dB (A): &#######xBC; hours. K factor The "K factor" is an industry standard uncertanty figure. It represents the natral variation in testing for noise.

The true noise figure could be + or - the K factor figure. 0 &#####x2013; 1,800 / 1,000 / 900 rpm. Vibration Machines by their nature have the habit of transferring vibration to the user.

Use AVT machines to reduce your exposure to vibration. Vibration above 2.5 m / s &#######xB2; is harmful. The maximum time of exposure depends on the vibration value: 5 m/s&#######xB2;: 8 hours 10 m/s&#######xB2;: 2 hours 20m/s&#######xB2;: &#######xBD; hours Tri-axial vibration values are used to calculate all Makita vibration figures. It represents the natral variation in testing for vibration.

The true vibration figure could be + or - the K factor figure. Weight As a permanent member of EPTA, the European Power Tool Association, Makita is committed to publishing weights in according with the EPTA standards.

This standard is derived from EU Directive 1999/44/EC. The standard is a strict agreement with EPTA as to how different machines are to be weighted, so you can compare machines across the market.

3.3 - 3.6 kg. Any product you return must be in the same condition you received it and in the original packaging. User benefits: -------------- ---Extra-high max tightening torque ---Brushless motor ---Electric brake ---Variable speed control by trigger ---Forward / reverse rotation ---Twin LED job light ---Electronic 3-stage impact power selection (Hard/Medium/Soft) ---Compact and lightweight design ---Ergonomic soft grip --- Technical info: --------------- Nut Busting Torque 1,600 Nm Battery Type Ni-Cad (Nickel Cadmium) battery. Lithium-ion Body only machine Body only Body only models are supplied without batteries, charger and case. Voltage 18 v Battery Quantity (5.0ah) 0 Driving Shank 1/2 Square Blows per Minute (Hi) - ipm 0 - 2,200 ipm Blows per Minute (Med) - ipm 0 - 2,000 ipm Blows per Minute (Lo) - ipm 0 - 1,800 ipm Standard Bolt M12-M30 High Tensile Bolt M10-M24 Noise sound pressure Sound level Machines have the habit of producing noise. The maximum time of exposure depends on the sound pressure level: 80dB (A): 8 hours 83dB (A): 4 hours 86dB (A): 2 hours 89dB (A): 1 hours 92dB (A): ½ hour 95dB (A): ¼ hours 97 dB(A) Noise sound power Sound level Machines have the habit of producing noise. The maximum time of exposure depends on the sound pressure level: 80dB (A): 8 hours 83dB (A): 4 hours 86dB (A): 2 hours 89dB (A): 1 hours 92dB (A): ½ hour 95dB (A): ¼ hours 108 dB(A) Noise K factor K factor The "K factor" is an industry standard uncertanty figure. 3 dB(A) No Load Speed (hard/med/soft) 0 - 1,800 / 1,000 / 900 rpm Max Fastening Torque 1000 Nm Vibration: Fastening Bolt Vibration Machines by their nature have the habit of transferring vibration to the user.

Vibration above 2.5 m / s ² is harmful. The maximum time of exposure depends on the vibration value: 5 m/s²: 8 hours 10 m/s²: 2 hours 20m/s²: ½ hours Tri-axial vibration values are used to calculate all Makita vibration figures. 18 m/sec² Vibration K factor K factor The "K factor" is an industry standard uncertanty figure. 1.5 m/sec² Net weight Weight As a permanent member of EPTA, the European Power Tool Association, Makita is committed to publishing weights in according with the EPTA standards.

This item is in the category "Home, Furniture & DIY\DIY Tools & Workshop Equipment\Power Tools\Cordless Drills". The seller is "essextools" and is located in this country: GB. This item can be shipped to United Kingdom.

EAN: 0088381803397
Brand: Makita
Battery Technology: Li-ion
Type: Impact Wrench
Motor Type: Brushless
Voltage: 18 V
Model: DTW1002Z
MPN: DTW1002Z
Power: 500 W
Colour: Blue